ซีรีส์:
Power Mate Model E
รหัสคู่มือ: B-62114E/03
ข้อมูลเพิ่มเติม:
Operator's Manual หน้า: 22
| รหัส | กลุ่ม | รหัส G เริ่มต้น | ฟังก์ชัน |
|---|---|---|---|
| G00 | 01 | + | Positioning (Rapid traverse) |
| G01 | 01 | + | Linear intrerpolation (Cutting feed) |
| G04 | 00 | Dwell, Exact stop | |
| G10 | 00 | Data setting | |
| G11 | 00 | Data setting mode cancel | |
| G20 | 02 | Input in inch | |
| G21 | 02 | Input in mm | |
| G27 | 00 | Reference point return check | |
| G28 | 00 | Return to reference point | |
| G29 | 00 | Return from reference point | |
| G30 | 00 | 2nd reference point return | |
| G31 | 00 | Skip function | |
| G43 | 06 | Tool length compensation (+) | |
| G44 | 06 | Tool length compensation (-) | |
| G49 | 06 | Tool length compensation cancel | |
| G65 | 00 | Macro Command | |
| G90 | 03 | + | Absolute Command |
| G91 | 03 | Incremental Command | |
| G92 | 00 | Coordinate system setting | |
| G93 | 04 | Feed rate | |
| G94 | 04 | + | Feed per minute |