系列:
Series 16 / 18 / 160 / 180 – Model C
for Lathe (G code B)
手册ID: B-62754EN/01
附加信息:
Operator's Manual 页: 38-40
| 代码 | 组 | 初始 G 代码 | 功能 |
|---|---|---|---|
| G00 | 01 | + | Positioning (Rapid traverse) |
| G01 | 01 | Linear interpolation (Cutting feed) | |
| G02 | 01 | Circular interpolation CW / Helical interpolation CW | |
| G03 | 01 | Circular interpolation CCW / Helical interpolation CCW | |
| G04 | 00 | Dwell | |
| G05 | 00 | High speed cycle cutting | |
| G07.1 (G107) | 00 | Cylindrical interpolation | |
| G10 | 00 | Programmable offset input | |
| G10.6 | 00 | Tool retract & recover | |
| G11 | 00 | Programmable offset input cancel | |
| G12.1 (G112) | 21 | Polar coordinate interpolation mode | |
| G13.1 (G113) | 21 | + | Polar coordinate interpolation cancel mode |
| G17 | 02 | XY plane selection | |
| G18 | 02 | + | ZX plane selection |
| G19 | 02 | YZ plane selection | |
| G20 | 06 | Input in inch | |
| G21 | 06 | Input in mm | |
| G22 | 09 | + | Stored stroke check function on |
| G23 | 09 | Stored stroke check function off | |
| G25 | 08 | + | Spindle speed fluctuation detection off |
| G26 | 08 | Spindle speed fluctuation detection on | |
| G27 | 00 | Reference position return check | |
| G28 | 00 | Return to reference position | |
| G30 | 00 | 2nd, 3rd, and 4th reference position return | |
| G30.1 | 00 | Floating reference point return | |
| G31 | 00 | Skip function | |
| G32 | 01 | Thread cutting | |
| G34 | 01 | Variable-lead thread cutting | |
| G36 | 00 | Automatic tool compensation X | |
| G37 | 00 | Automatic tool compensation Z | |
| G39 | 00 | Corner circular interpolation | |
| G40 | 07 | + | Tool nose radius compensation cancel |
| G41 | 07 | Tool nose radius compensation left | |
| G42 | 07 | Tool nose radius compensation right | |
| G50.2 (G250) | 20 | + | Polygonal turning cance |
| G51.2 (G251) | 20 | Polygonal turning | |
| G52 | 00 | Local coordinate system setting | |
| G53 | 00 | Machine coordinate system setting | |
| G54 | 14 | + | Workpiece coordinate system 1 selection |
| G55 | 14 | Workpiece coordinate system 2 selection | |
| G56 | 14 | Workpiece coordinate system 3 selection | |
| G57 | 14 | Workpiece coordinate system 4 selection | |
| G58 | 14 | Workpiece coordinate system 5 selection | |
| G59 | 14 | Workpiece coordinate system 6 selection | |
| G65 | 00 | Macro calling | |
| G66 | 12 | Macro modal call | |
| G67 | 12 | + | Macro modal call cancel |
| G68 | 04 | Mirror image for double turrets ON or balance cut mode | |
| G69 | 04 | + | Mirror image for double turrets OFF or balance cut mode cancel |
| G70 | 00 | Finishing cycle | |
| G71 | 00 | Stock removal in turning | |
| G71 | 01 | Traverse grinding cycle (for grinding machine | |
| G72 | 00 | Stock removal in facing | |
| G72 | 01 | Traverse direct constant–dimension grinding cycle (for grinding machine) | |
| G73 | 00 | Pattern repeating | |
| G73 | 01 | Oscilation grinding cycle (for grinding machine) | |
| G74 | 00 | End face peck drilling | |
| G74 | 01 | Oscilation direct constant–dimension grinding cycle (for grinding machine) | |
| G75 | 00 | Outer diameter/internal diameter drilling | |
| G76 | 00 | Multiple threading cycle | |
| G77 | 01 | Outer diameter/internal diameter cutting cycle | |
| G78 | 01 | Thread cutting cycle | |
| G79 | 01 | Endface turning cycle | |
| G80 | 10 | + | Canned cycle for drilling cancel |
| G83 | 10 | Cycle for face drilling | |
| G84 | 10 | Cycle for face tapping | |
| G86 | 10 | Cycle for face boring | |
| G87 | 10 | Cycle for side drilling | |
| G88 | 10 | Cycle for side tapping | |
| G89 | 10 | Cycle for side boring | |
| G90 | 03 | + | Absolute programming |
| G91 | 03 | Incremental programming | |
| G92 | 00 | Coordinate system setting or max. spindle speed settin | |
| G92.1 | 00 | Workpiece coordinate system preset | |
| G94 | 05 | Per minute feed | |
| G95 | 05 | + | Per revolution feed |
| G96 | 02 | Constant surface speed control | |
| G97 | 02 | + | Constant surface speed control cancel |
| G98 | 11 | Return to initial level | |
| G99 | 11 | Return to R point level |