Serye:
FANUC Series 0i-MODEL D
FANUC Series 0i Mate-MODEL D
ID ng Manwal: B-64304EN-2/01
Karagdagang impormasyon:
For Machining Center System
Users manual p.: 15-17
| Kode | Grupo | Paunang G codes | Punsyon |
|---|---|---|---|
| G00 | 01 | + | Pagpoposisyon (mabilis na paggalaw) |
| G01 | 01 | + | Linear na interpolasyon (cutting feed) |
| G02 | 01 | Pabilog na interpolasyon CW o helical interpolation CW | |
| G03 | 01 | Pabilog na interpolasyon CCW o helical interpolation CCW | |
| G04 | 00 | Pag-antala, eksaktong paghinto | |
| G05.1 | 00 | AI advanced preview control / AI contour control | |
| G05.4 | 00 | HRV3 naka-on/naka-off | |
| G07.1 | 00 | Silindrikong interpolasyon | |
| G09 | 00 | Eksaktong paghinto | |
| G10 | 00 | Programmable data input | |
| G11 | 00 | Kanselahin ang programmable data input mode | |
| G15 | 00 | + | Kanselahin ang utos ng polar coordinates |
| G16 | 17 | Utos ng polar coordinates | |
| G160 | 00 | + | Kanselahin ang kontrol sa in-feed (para sa grinding machine) |
| G161 | 20 | Kontrol sa in-feed (para sa grinding machine) | |
| G17 | 02 | + | Pagpili ng eroplano XpYp |
| G18 | 02 | + | Pagpili ng eroplano ZpXp |
| G19 | 02 | + | Pagpili ng eroplano YpZp |
| G20 | 06 | Input sa pulgada | |
| G21 | 06 | Input sa milimetro | |
| G22 | 04 | + | Naka-on ang stored stroke check function |
| G23 | 04 | Stored stroke check function naka-off | |
| G27 | 00 | Suriin ang pagbabalik sa reference position | |
| G28 | 00 | Awtomatikong pagbabalik sa reference position | |
| G29 | 00 | Paggalaw mula sa reference position | |
| G30 | 00 | Pagbabalik sa ika-2, ika-3 at ika-4 na reference position | |
| G31 | 00 | Laktawan na function | |
| G33 | 01 | Pagputol ng sinulid | |
| G37 | 00 | Awtomatikong pagsukat ng haba ng tool | |
| G39 | 00 | Kompensasyon ng pamutol: pabilog na interpolasyon sa kanto | |
| G40 | 07 | Kompensasyon ng pamutol: kanselahin | |
| G40.1 | 19 | Mode ng pagkansela ng normal direction control | |
| G41 | 07 | Kompensasyon ng pamutol: kaliwa | |
| G41.1 | 19 | Kontrol ng normal na direksyon naka-on: kaliwa | |
| G42 | 07 | Kompensasyon ng pamutol: kanan | |
| G42.1 | 19 | Kontrol ng normal na direksyon naka-on: kanan | |
| G43 | 08 | Positibong kompensasyon ng haba ng tool | |
| G44 | 08 | Negatibong kompensasyon ng haba ng tool | |
| G45 | 00 | Pag-offset ng tool: dagdagan | |
| G46 | 00 | Pag-offset ng tool: bawasan | |
| G47 | 00 | Pag-offset ng tool: dobleng pagtaas | |
| G48 | 00 | Pag-offset ng tool: dobleng bawas | |
| G49 | 08 | + | Kanselahin ang kompensasyon ng haba ng tool |
| G50 | 11 | + | Kanselahin ang scaling |
| G50.1 | 22 | + | Kanselahin ang programmable mirror image |
| G51 | 11 | Scaling | |
| G51.1 | 22 | Programmable mirror image | |
| G52 | 00 | Pagtatakda ng lokal na coordinate system | |
| G53 | 00 | Pagtatakda ng sistema ng coordinate ng makina | |
| G54 | 14 | + | Pagpili ng coordinate system ng workpiece 1 |
| G54.1 | 14 | Karagdagang pagpili ng coordinate system ng workpiece | |
| G55 | 14 | Pagpili ng coordinate system ng workpiece 2 | |
| G56 | 14 | Pagpili ng coordinate system ng workpiece 3 | |
| G57 | 14 | Pagpili ng coordinate system ng workpiece 4 | |
| G58 | 14 | Pagpili ng coordinate system ng workpiece 5 | |
| G59 | 14 | Pagpili ng coordinate system ng workpiece 6 | |
| G60 | 00 | Isang direksyon na pagpoposisyon | |
| G61 | 00 | Eksaktong stop mode | |
| G62 | 00 | Awtomatik na pag-override ng sulok | |
| G63 | 00 | Tapping mode | |
| G64 | 15 | + | Cutting mode |
| G65 | 00 | Macro call | |
| G66 | 00 | Macro modal call | |
| G67 | 12 | + | Kanselahin ang macro modal call |
| G68 | 00 | Coordinate system rotation mode on | |
| G69 | 16 | + | Coordinate system rotation mode off |
| G73 | 00 | Peck drilling cycle | |
| G74 | 09 | Left-handed tapping cycle | |
| G75 | 01 | Plunge grinding cycle (para sa grinding machine) | |
| G76 | 09 | Fine boring cycle | |
| G77 | 00 | Plunge direct sizing/grinding cycle (para sa grinding machine) | |
| G78 | 00 | Continuous-feed surface grinding cycle (para sa grinding machine) | |
| G79 | 01 | Intermittent-feed surface grinding cycle (para sa grinding machine) | |
| G80 | 09 | + | Kanselahin ang canned cycle / Electronic gear box: kanselasyon ng synchronization |
| G80.4 | 09 | + | Electronic gear box: kanselasyon ng synchronization |
| G81 | 09 | + | Drilling cycle o spot boring cycle / Electronic gear box: simula ng synchronization |
| G81.4 | 34 | Electronic gear box: simula ng synchronization | |
| G82 | 09 | Drilling cycle o counter boring cycle | |
| G83 | 09 | Peck drilling cycle | |
| G84 | 09 | Tapping cycle | |
| G84.2 | 09 | Rigid tapping cycle (format FS10/11) | |
| G84.3 | 09 | Left-handed rigid tapping cycle (format FS10/11) | |
| G85 | 09 | Boring cycle | |
| G86 | 09 | Boring cycle | |
| G87 | 09 | Back boring cycle | |
| G88 | 09 | Boring cycle | |
| G89 | 09 | Boring cycle | |
| G90 | 03 | + | Absolute programming |
| G91 | 03 | + | Incremental programming |
| G91.1 | 03 | Pagsusuri sa tinukoy na pinakamataas na incremental na halaga | |
| G92 | 00 | Setting para sa workpiece coordinate system o clamp sa maximum spindle speed | |
| G92.1 | 00 | Preset ng workpiece coordinate system | |
| G93 | 00 | Inverse time feed | |
| G94 | 05 | + | Feed per minute |
| G95 | 05 | Feed per revolution | |
| G96 | 13 | Constant surface speed control | |
| G97 | 13 | + | Kanselahin ang constant surface speed control |
| G98 | 10 | + | Canned cycle: balik sa initial level |
| G99 | 10 | Canned cycle: balik sa antas ng R point |